UBERMILK
A Superlative Milk Experience Ubermilk is the innovative milk frother for baristas who demand high standards of quality and operating efficiency. Create first class latte art milk foam by simply pressing one button!
WHY ÜBERMILK
The Übermilk improves the workflow of both baristas and restaurateurs by providing them with high quality milk froth and 100% reliability.
Easy
Place a pitcher under the spout, select a pre-defined quantity and out comes perfect milk foam!
Convenient
Increase your output by taking the load off of your baristas.
Delicious
Perfect milk foam from the first to the last cup, no matter what drink you are serving.
UBER PERFORMANCE
Perfect and consistent foam
with minimal required intervention.
Save on Milk
Übermilk yields considerable savings, giving you the exact amount needed for your drinks.
Simple Cleaning
Semi-automatic cleaning with minimal intervention
Touch Display
with intuitive, user-friendly controls.
| Product Designation | |
|---|---|
| Model | Übermilk ONE |
| Width × height × depth | 180 mm × 540 mm × 485 mm |
| Weight | 25 kg |
| Voltage | 220–240 V |
| Power consumption | 3100 W |
| Frequency | 50/60 Hz |
| Ambient temperature | +10°C to +40°C |
| Temperature setting | Limited from 55°C – 68°C (recommended 65°C) |
| Length of the milk hose | Max. 2 m |
| Diameter of the milk hose | 6 mm |
| Milk throughput | 1.3 liters per minute / 250 drinks per hour |
| Notes on installation | The line for the device should be fused separately! |
Daily Cleaning
When
- The Ubermilk MUST be cleaned before switching off
- Clean the Ubermilk once a day before closing the bar
- If you operate the machine more than 12 hours a day, clean twice a day (once after every shift).
How
- On the Ubermilk screen, go to “Settings” and then press “Cleaning”.
- Follow the instructions on the screen.
- You can also watch the video below for a full explanation of the cleaning procedure.
What
- Ubermilk cleaning chemicals: agent 1 (red) and agent 2 (blue).
- Filter discs (one per day).
- Two containers with a capacity of 2 - 5 liters.
Cleaning Procedure — 5 Steps
1. Preparation
- Materials required: 2 containers (min. 2 liters), Übermilk cleaner.
- There are two different cleaners: Whether to use cleaner 1 or 2 is shown in the display.
- Go to Settings". Press the Cleaning" key. Follow the instructions on the display.
- Place an empty collection container under the outlet.
2. Pre-rinse
- Remove the outlet head and dispose of the filter disc.
- A new filter disc is inserted daily at the start of operation.
- Pour clear, warm water into the cleaning container.
- Remove the milk hose from the milk container and place it in the cleaning container with water
- Carry out the first cleaning step according to the instructions in the display!
3. Main cleaning
- Empty both containers.
- Place the collection container under the outlet
- Pour 50ml Übermilk cleaner and 1.5 water into the cleaning container.
- The cleaning agent to be used (1 or 2) is shown in the display.
- Place the intake hose and all parts of the outlet head in the cleaning container.
- Start the next cleaning step! (Remaining time is shown on the display).
4. Rinse out
- Empty both containers and rinse the cleaning container very thoroughly.
- Fill the cleaning container with 2 liters of clear, warm water.
- Perform the final step to rinse the Ubermilk.
5. Final step
- Empty both containers and rinse them out.
- Clean the intake hose, the thread of the outlet and the Übermilk case with a damp cloth.
- Switch off the Ubermilk at the toggle switch.
- The device is now ready for the next day of operation.
Safety instructions
- Wash and disinfect hands before and after cleaning.
- Wear gloves & safety goggles.
Employee confirmation
- I have taken note that:
- I may only clean Übermilk with the appropriate cleaning agents
- I must wear protective gloves ar protective clothing during cleaning.
- I must wear safety goggles during cleaning.
- I have fully understood the cleaning steps
The Übermilk is engineered to the highest quality to best serve your needs. It is sold with a 1-year limited warranty, subject to the conditions below:
The warranty period covers 1 year, valid from the date of purchase.
The warranty covers any defects due to the malfunctioning of original materials or defective assembly.
Profilers” will bear the shipping costs if the customer is outside the city of Riyadh, with the necessity of carefully packaging the parts
This warranty does not cover any damage due to: inappropriate use, inadequate maintenance, the lack of maintenance, the use of the device for any purpose other than that for which it is intended, improper installation, incorrect voltage, falls or normal wear and tear.
The Warranty does not cover any damages arising from repairs performed by unauthorized personnel.